| 形位公差带方向浅析 |
| |
| 引用本文： | 于清华. 形位公差带方向浅析[J]. 辽东学院学报(自然科学版), 2003, 10(2): 25-26 |
| |
| 作者姓名： | 于清华 |
| |
| 作者单位： | 丹东职业技术学院,机电系,辽宁,丹东,118003 |
| |
| 摘 要： | 形位公差是工程图样中一项重要的技术要求,掌握公差带方向是全面掌握形位公差的重要因素之一。本文就形位公差带的方向作了一定分析,指出公差带的方向应与正确评定被测要素误差的方向一致,公差带的方向应为公差带放置方向,本文就部分形位公差带方向进行分析。
|
| 关 键 词： | 形位公差 公差带方向 基准要素 |
| 文章编号： | 1008-2174(2003)02-0025-02 |
| 修稿时间： | 2002-10-16 |
A Brief Talk on the Aspect of Geometric Tolerance Zone |
| |
| YU Qing-hua. A Brief Talk on the Aspect of Geometric Tolerance Zone[J]. Journal of Liaodong University(Natural Sciences), 2003, 10(2): 25-26 |
| |
| Authors: | YU Qing-hua |
| |
| Affiliation: | YU Qing-hua |
| |
| Abstract: | Geometric tolerance is important technological reguirement in engineering drawing. To master the aspect of tolerance zone is an important element to master geometric tolerance, the author has analyzed it and pointed out that it should be consistent with the error' s aspect of measured element. The aspect of Geometric tolerance should be the aspect of its lying position. |
| |
| Keywords: | geometric tolerance zone aspect of geometric tolerance standard element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
