Numerical simulation of an advanced energy storage system using H2O–LiBr as working fluid, Part 1: System design and modeling |
| |
Authors: | S.M. Xu L. Zhang C.H. Xu J. Liang R. Du |
| |
Affiliation: | aR & D Lab of Refrigeration and Heat Pump Technology, Department of Power Engineering, Dalian University of Technology, Liao Ning, 116024, China;bDepartment of Automation and Computer-Aided Engineering, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong, China |
| |
Abstract: | The advanced energy storage technology proposed and patented by authors can be applied for cooling, heating, dehumidifying, combined cooling and heating, and so on. It is also called the variable mass energy transformation and storage (VMETS) technology in which the masses in one or two storage tanks change continuously during the energy charging and discharging processes. This paper presents an advanced energy storage system using aqueous lithium bromide (H2O–LiBr) as working fluid. As one of VMETS systems, this system is a closed system using two storage tanks. It is used to shift electrical load and store energy for cooling, heating or combined cooling and heating. It is environmental friendly because the water is used as refrigerant in the system. Its working principle and process of energy transformation and storage are totally different from those of the traditional thermal energy storage (TES) systems. The electric energy in off-peak time is mostly transformed into the chemical potential of the working fluid and stored in the system firstly. And then the potential is transformed into cold or heat energy by absorption refrigeration or heat pump mode when the consumers need the cold or heat energy. The key to the system is to regulate the chemical potential by controlling the absorbent (LiBr) mass fraction or concentration in the working fluid with respect to time. As a result, by using a solution storage tank and a water storage tank, the energy transformation and storage can be carried out at the desirable time to shift electric load efficiently. Since the concentration of the working solution in the VMETS cycle varies continuously, the working process of the VMETS system is dynamic. As the first part of our study, the working principle and flow of the VMETS system were introduced first, and then the system dynamic models were developed. To investigate the system characteristics and performances under full-storage and partial-storage strategies, the numerical simulation will be performed in the subsequent paper. The simulation results will be very helpful for guiding the actual system and device design. |
| |
Keywords: | Absorption system Water-lithium bromide Design Modeling Thermal storage Energy storageMots clé s: Systè me à absorption Eau-bromure de lithium Conception Modé lisation Accumulation thermique Stockage d'é nergie |
本文献已被 ScienceDirect 等数据库收录! |
|