| SUS430不锈钢夹杂物的变化规律研究 |
| |
| 引用本文： | 黄宗泽,池和冰,李双江,胡汉涛,李阳,姜周华. SUS430不锈钢夹杂物的变化规律研究[J]. 宝钢技术, 2011, 0(1): 6-10. DOI: 10.3969/j.issn.1008-0716.2011.01.002 |
| |
| 作者姓名： | 黄宗泽 池和冰 李双江 胡汉涛 李阳 姜周华 |
| |
| 作者单位： | 宝山钢铁股份有限公司,上海,201900;东北大学,辽宁,沈阳,110004 |
| |
| 摘 要： | 对采用EAF-AOD-LF-CC工艺路线生产SUS430不锈钢炼钢过程夹杂物的成分组成和形貌、尺寸变化进行了分析,结果表明,SUS430不锈钢中主要形成呈球状或不规则球状分布的硅酸盐复合夹杂物,其变形能力较差。随着LF精炼和连铸过程的进行,SUS430不锈钢钢水中夹杂物的平均直径呈逐渐减小的趋势,铸坯夹杂物的平均直径为3.4μm左右,5μm以上的夹杂物占夹杂物总数的1%以下。变形能力较差的硅酸盐夹杂和镁铝尖晶石夹杂是引起SUS430不锈钢冷轧板表面线鳞缺陷的重要原因,采用钙处理和复合脱氧工艺,对改善SUS430不锈钢冷轧板的表面线鳞缺陷有利。
|
| 关 键 词： | 不锈钢 夹杂物 线鳞缺陷 |
Study on behavior of inclusions in SUS430 stainless steel |
| |
| HUANG Zongze,CHI Hebing,LI Shuangjiang,HU Hantao,LI Yang,JIANG Zhouhua. Study on behavior of inclusions in SUS430 stainless steel[J]. Baosteel Technology, 2011, 0(1): 6-10. DOI: 10.3969/j.issn.1008-0716.2011.01.002 |
| |
| Authors: | HUANG Zongze CHI Hebing LI Shuangjiang HU Hantao LI Yang JIANG Zhouhua |
| |
| Affiliation: | HUANG Zongze1,CHI Hebing1,LI Shuangjiang2,HU Hantao1,LI Yang2 and JIANG Zhouhua2(1.Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China,2.Northeatern University,Shenyang 110004,Liaoning,China) |
| |
| Abstract: | The composition,morphology and size distribution of inclusions in SUS430 stainless steel produced by the route of EAF-AOD-LF-CC were studied.The results showed that the inclusions in SUS430 stainless steel are in spherical or irregular globular distribution.The main composition of the inclusion with poor deformation ability is silicate.The average diameter of the inclusion in SUS430 stainless steel decreased gradually with the implementation of the LF refining and continuous casting processes.The average di... |
| |
| Keywords: | stainless steel inclusion lamination |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
