首页 | 本学科首页   官方微博 | 高级检索  
     


Elevated temperature properties of Mg- 12Li-Al-MgO composites
Authors:WEI Xiao-wei  HUANG Qing-min
Affiliation:1. School of Civil Engineering & International Institute for Urban Systems Engineering, Southeast University, Nanjing 210096, China;2. Department of Mechanical Engineering, Graduate School & Faculty of Engineering, Chiba University, Chiba 263-8522, Japan
Abstract:The compressive creep of Mg-12Li-Al-MgO particulate composites was investigated, which were produced by the reaction of reinforcement materials (B2O3) with Mg-12Li-Al alloy melt in the temperature range of 100–190 °C and under different compressive stress in the range of 40–70 MPa with special apparatus. The content of MgO particulates is about 0, 5%, 10%, 15%(volume fraction) in Mg-12Li-Al alloy respectively. The results reveal that the creep resistance of the particulate composites is increased with increasing the content of MgO particulates and considerable improvement in creep resistance is observed in Mg-12Li-Al-MgO composites. However, over all range of temperatures and stresses, the creep data for these composites can be correlated using an empirical equation
></figure><sub>s</sub> = <em>Aσ<sup>n</sup></em>exp(?<em>Q/RT</em>), where <em>n</em> is 4.93 and <em>Q</em> is about 78.1 kJ/mol for Mg-14Li-Al alloy and <em>n</em> is between 7.48 and 9.47 and <em>Q</em> is 111.2–137.3 kJ/mol for Mg-12Li-Al-MgO composites. The different compressive creep behavior of the composites is associated with the different material constant <em>A</em>. The compressive creep rate is controlled by the lattice diffusion of Li and dislocation climb.</td>
	  </tr> 
	  <tr>
	   <td align=
Keywords:Mg-12Li-Al alloy  MgO particulates  B2O3  microstructure  compressive creep behavior
本文献已被 CNKI 维普 万方数据 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号