| 向家坝左岸电站800 MW级机组轴线调整工艺研究 |
| |
| 引用本文： | 赵海军,孙嘉燕,王新洪. 向家坝左岸电站800 MW级机组轴线调整工艺研究[J]. 黑龙江电力, 2014, 0(1): 78-80,87 |
| |
| 作者姓名： | 赵海军 孙嘉燕 王新洪 |
| |
| 作者单位： | [1]东北林业大学,哈尔滨150040 [2]哈尔滨电机厂有限责任公司,哈尔滨150040 |
| |
| 摘 要： | 针对向家坝左岸电站800 MW级机组初次盘车后轴线摆度过大的问题,分析了机组摆度过大的原因,提出了通过机组轴线测量确定机组中心的方法,并以此为基础采用平移轴方法调整机组轴线的工艺方案.试验证明,利用平移轴方法进行轴线调整是可行的,可以有效地减小机组轴线摆度,使其满足水轮发电机安装要求,保障机组运行稳定.
|
| 关 键 词： | 水轮发电机组 轴线调整 摆度 |
Research on shaft axis alignment of Xiangjiaba left bank hydropower Station 800 MW Units |
| |
| ZHAO Haijun,SUN Jiayan,WANG Xinhong. Research on shaft axis alignment of Xiangjiaba left bank hydropower Station 800 MW Units[J]. Heilongjiang Electric Power, 2014, 0(1): 78-80,87 |
| |
| Authors: | ZHAO Haijun SUN Jiayan WANG Xinhong |
| |
| Affiliation: | 1. Northeast Forestry University, Harbin 150040, China ;2. Harbin Electric Machinery Company Limited, Harbin 150040, China) |
| |
| Abstract: | Aiming at the large swing of main shaft axis of 800 MW units in Xiangjiaba left bank hydropower station, the paper analyzes the causes of large swing, and proposes to determine the unit center by measuring shaft axis, on basis of which working out the shaft axis alignment plan which is axis translation. The test proves that the plan, which is feasible, is able to reduce the swing of shaft axis to the standard of Specification installation of hydraulic turbine generator units, which guarantees the stable operation of the units. |
| |
| Keywords: | hydropower unit axis alignment swing |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
