|
|||||
|
|
| 铜合金管材铸轧工艺设计专家系统的开发及应用 | |
| 引用本文： | 李章刚,李冰,张士宏,申卫华,张蓉霞,刘化民,张金利. 铜合金管材铸轧工艺设计专家系统的开发及应用[J]. 中国机械工程, 2005, 16(23): 2101-2105 |
| 作者姓名： | 李章刚 李冰 张士宏 申卫华 张蓉霞 刘化民 张金利 |
| 作者单位： | 1. 中国科学院金属研究所,沈阳,110016 2. 中国科学院金属研究所,沈阳,110016;中国科学院精密铜管工程研究中心,新乡,453000 3. 北京航空制造工程研究所,北京,100024 4. 吉林大学,长春,130025 5. 中国科学院精密铜管工程研究中心,新乡,453000 |
| 基金项目： | 国家科技部科技攻关计划引导项目(2002BA327C) |
| 摘 要： | 针对铸轧工艺设计工作量大、效率低的问题,进行了“铜合金管材铸轧工艺专家系统”软件的开发。该系统将知识推理、神经网络、遗传算法、数值模拟、均匀设计和CAD参数化设计等技术运用到工艺设计和参数优化中,充分发挥各自技术优点,克服了传统专家系统智能程度低、设计方法单一和知识获取困难的缺点。利用该系统,可实现铸轧工艺中水平连铸、三辊行星轧制和游动芯头拉拔三个主要工序的智能化工艺设计,解决了铜管材加工过程中的各种实际问题。 |
| 关 键 词： | 铜合金管材 铸轧 专家系统 数值模拟 神经网络 遗传算法 均匀设计 CAD |
| 文章编号： | 1004-132X（2005）23-2101-05 |
| 收稿时间： | 2005-01-10 |
| 修稿时间： | 2005-01-10 |
Development of Expert System for Casting Rolling Process Design of Copper Alloy Tubes and Its Applications |
|
| Li Zhanggang,Li Bing,Zhang Shihong,Shen Weihua,Zhang Rongxia,Liu Huamin,Zhang Jinli. Development of Expert System for Casting Rolling Process Design of Copper Alloy Tubes and Its Applications[J]. China Mechanical Engineering, 2005, 16(23): 2101-2105 | |
| Authors: | Li Zhanggang Li Bing Zhang Shihong Shen Weihua Zhang Rongxia Liu Huamin Zhang Jinli |
| Affiliation: | 1. Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 110016; 2. The Precision Copper Tube Engineering Research Center, Chinese Academy of Sciences, Xinxiang, 453000;3. Beijing Aeronautical Manufacturing Technology Research Institute, Beijing, 100024; 4. Jilin University, Changchun, 130025 |
| Abstract: | To solve the problems of massive work and low efficiency during Casting Rolling processes design,an expert system for Casting Rolling process design of copper alloy tubes had been developed.Knowledge Inference,Artificial Neural Networks(ANN),Genetic Algorithm(GA),Numerical Simulation,Uniform Design and CAD Parameterization Design were integrated into the system for process design and parameter optimization,which can exert advantages of each technology and overcome weaknesses of the traditional Expert System such as poor intelligence,single design method and the difficulty to acquire new knowledge.This system can design three main procedures of Casting Rolling process,they are horizontal continuous casting,three-roll planetary rolling and tube drawing with floating plug,and deal with the practical problems in copper tube process. |
| Keywords: | copper alloy tube casting rolling expert system numerical simulation ANN GA uniform design CAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |