首页 | 本学科首页   官方微博 | 高级检索  
     

蒙特卡罗方法在CZT探测器测量乏燃料组件燃耗中的应用
引用本文:郑玉来,李建华,赵永刚,金惠民,朱留超,陈彦.蒙特卡罗方法在CZT探测器测量乏燃料组件燃耗中的应用[J].原子能科学技术,2012,46(11):1368-1371.
作者姓名:郑玉来  李建华  赵永刚  金惠民  朱留超  陈彦
作者单位:中国原子能科学研究院,北京102413
摘    要:利用碲锌镉(CZT)探测器组成的γ谱探测系统是一种测量乏燃料组件燃耗的较有效的方法。本文利用蒙特卡罗方法,借助于Geant4软件包计算在两种测量方式、多个准直高度条件下组件中137Cs和134Cs的全能峰探测效率,对测量结果的正确评价分析具有一定意义。另外,采用偏倚抽样方法确定源粒子发射方向,极大提高了CZT探测器全能峰探测效率。

关 键 词:蒙特卡罗方法    燃耗    碲锌镉    Geant4

Monte Carlo Simulation of Burnup Measurement of Spent Fuel Assembly by Using CdZnTe Detector System
ZHENG Yu-lai , LI Jian-hua , ZHAO Yong-gang , JIN Hui-min , ZHU Liu-chao , CHEN Yan.Monte Carlo Simulation of Burnup Measurement of Spent Fuel Assembly by Using CdZnTe Detector System[J].Atomic Energy Science and Technology,2012,46(11):1368-1371.
Authors:ZHENG Yu-lai  LI Jian-hua  ZHAO Yong-gang  JIN Hui-min  ZHU Liu-chao  CHEN Yan
Affiliation:China Institute of Atomic Energy, Beijing 102413, China
Abstract:The γ spectrum detecting system with CdZnTe (CZT) detector is one of effective methods for burnup measurement of spent fuel assembly. The detector efficiencies of the full energy peak for 137Cs and 134Cs were calculated with Geant4. The direction biasing sample method of source particle was used to improve calculation efficiency. The results provide a theoretical guide for the further burnup measurement.
Keywords:Monte Carlo method  burnup  CdZnTe  Geant4
本文献已被 万方数据 等数据库收录!
点击此处可从《原子能科学技术》浏览原始摘要信息
点击此处可从《原子能科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号