首页 | 本学科首页   官方微博 | 高级检索  
     

沥青自愈合性能影响因素探究及CT扫描细观分析
引用本文:周璐,黄卫东,孙立军,吕泉,张翛. 沥青自愈合性能影响因素探究及CT扫描细观分析[J]. 哈尔滨工业大学学报, 2021, 53(9): 1-9
作者姓名:周璐  黄卫东  孙立军  吕泉  张翛
作者单位:道路与交通工程教育部重点实验室(同济大学) ,上海201804;同济大学 交通运输工程学院,上海201804;道路与交通工程教育部重点实验室(同济大学) ,上海201804;同济大学 交通运输工程学院,上海201804;上海市轨道交通结构耐久与系统安全重点实验室(同济大学) ,上海201804;太原理工大学 土木工程学院,太原030024
基金项目:国家自然科学基金(1,6)
摘    要:为了直观研究沥青的自愈合性能,采用BBS(binder bond strength)拉拔实验探究温度、水分、老化及改性剂对沥青自愈合性能的影响,并利用CT(computed tomography)扫描实验,从细观角度观测沥青在不同条件下的自愈合进程.BBS实验结果表明:较高温度与干燥条件有利于沥青的自愈合,水分不利于沥...

关 键 词:沥青自愈合  拉拔实验  CT扫描  界面愈合  细观分析
收稿时间:2020-08-19

Influence factors of asphalt self-healing performance and micro-analysis by CT scanning
Affiliation:Key Laboratory of Road and Traffic Engineering of Ministry of Education Tongji University, Shanghai 201804, China ;College of Transportation Engineering, Tongji University, Shanghai 201804, China;Key Laboratory of Road and Traffic Engineering of Ministry of Education Tongji University, Shanghai 201804, China ;College of Transportation Engineering, Tongji University, Shanghai 201804, China ;Shanghai Key Laboratory of Rail Infrastructure Durability and System Safety Tongji University, Shanghai 201804, China; College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Abstract:To intuitively investigate the self-healing performance of asphalt, binder bond strength (BBS) test was conducted to study the influence of temperature, moisture, aging, and SBS modifier on the self-healing performance of asphalt. The healing process of asphalt under different healing conditions was observed by computed tomography (CT) test. BBS test results showed that higher temperature and dry condition were conducive to the asphalt self-healing performance. Moisture was disadvantageous to the short-term and long-term healing of asphalt, but could improve the healing ratio during the mid-term of the healing process. The healing behavior and the stabilized healing strength of 4.5% (mass fraction) SBS-modified asphalt after multiple failure-healing cycles were lower than those of base asphalt, and the healing performance of SBS-modified asphalt was less sensitive to aging. CT scanning results showed that the healing process of asphalt mainly included three steps: gathering, rounding, and moving. CT images confirmed the favorable effect of higher temperature and dry condition on asphalt self-healing and the adverse effect on SBS modifier.
Keywords:asphalt self-healing   binder bond strength test   CT scanning   interface healing   micro-analysis
本文献已被 万方数据 等数据库收录!
点击此处可从《哈尔滨工业大学学报》浏览原始摘要信息
点击此处可从《哈尔滨工业大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号