| 塑料模具设计中垫板变形的力学研究 |
| |
| 引用本文： | 李云. 塑料模具设计中垫板变形的力学研究[J]. 湖南工业职业技术学院学报, 2008, 8(6) |
| |
| 作者姓名： | 李云 |
| |
| 作者单位： | 陕西工业职业技术学院,陕西,咸阳,712000 |
| |
| 摘 要： | 分析了注射压力对垫板变形的影响,根据弹性力学的理论基础,推导了圆形垫板和矩形垫板变形的计算公式,应用有限元分析软件ANSYS对结果进行验证,为合理确定垫板尺寸提供了理论依据。
|
| 关 键 词： | 塑料模具 垫板 变形 |
Research on Plastic Mold Support Plate Deformation |
| |
| LI Yun. Research on Plastic Mold Support Plate Deformation[J]. Journal of Hunan Industry Polytechnic, 2008, 8(6) |
| |
| Authors: | LI Yun |
| |
| Abstract: | The influence of the injection pressure to support plate deformation was analyzed.On the theoretical base of elasticity mechanics,formulas of the maximum deformation to circle and rectangle support plate were calculated,Then finite element analysis software ANSYS is used to verify the results.This paper provides a theoretical basis for deciding the support plate dimension rightly. |
| |
| Keywords: | plastic mold support plate deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
