|
|||||
|
|
| 冷连轧机板形与板厚控制系统的建模与仿真 | |
| 引用本文： | 赵丽娟,胡建华,李世旭,刘杰. 冷连轧机板形与板厚控制系统的建模与仿真[J]. 机械与电子, 2007, 0(10): 62-64 |
| 作者姓名： | 赵丽娟 胡建华 李世旭 刘杰 |
| 作者单位： | 1. 东北大学机械工程学院,辽宁,沈阳,110004;辽宁工程技术大学机械工程学院,辽宁,阜新,123000 2. 辽宁工程技术大学机械工程学院,辽宁,阜新,123000 3. 东北大学机械工程学院,辽宁,沈阳,110004 |
| 摘 要： | 以某钢厂1 676 mm冷连轧机第4轧机为研究对象,运用机械系统动力学分析软件ADAMS和有限元分析软件ANSYS联合,建立了该轧机的刚柔耦合多体系统虚拟样机,并应用ADAMS/Hydraulics将板厚、板形控制系统集成在该样机中,建立了机电液一体化的虚拟轧机.求解了轧机的有载辊缝曲线,仿真曲线与现场实测曲线基本吻合,验证了该建模方法的正确性,并仿真了轧件各个关键区域的厚度变化曲线,得到了轧件的各个板凸度变化曲线. |
| 关 键 词： | 冷连轧机 ADAMS ANSYS 虚拟样机 板厚控制系统 板形控制系统 冷连轧机 板形控制 板厚控制系统 建模与仿真 Mill Continuous Cold Control System Shape Gauge Simulation 板凸度 变化曲线 厚度 关键区域 轧件 建模方法 验证 实测曲线 仿真曲线 |
| 文章编号： | 1001-2257（2007）10-0062-03 |
| 修稿时间： | 2007-06-14 |
Modeling and Simulation of Gauge Control System and Shape Control System in Cold Continuous Mill |
|
| ZHAO Li-juan,HU Jian-hua,LI Shi-xu,LIU Jie. Modeling and Simulation of Gauge Control System and Shape Control System in Cold Continuous Mill[J]. Machinery & Electronics, 2007, 0(10): 62-64 | |
| Authors: | ZHAO Li-juan HU Jian-hua LI Shi-xu LIU Jie |
| Affiliation: | 1. Mechanical Engineering College, Northeastern University. Shenyang 110004, China ; 2. Mechanical Engineering College, Liaoning Technical University,Fuxin 123000,China |
| Abstract: | A virtual prototype is built by using mechanical system dynamics analysis software ADAMS and finite element analysis software ANSYS,the virtual prototype is the fourth rolling mill in 1 676 mm cold continuous mill.Applying ADAMS/Hydraulics integrated the gauge control system and shape control system in the virtual prototype.Solving the load-gap curves of the virtual prototype.It is obvious that the simulation curves are similar to the real measured curves.It also has confirmed the reliability of this modeling method,and simulated thickness change curves of strip in each region,obtained crown change curves of strip in each region. |
| Keywords: | cold continuous mill ADAMS ANSYS virtual prototype gauge control system shape control system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |