| 基于UG的CAE技术在摇臂机构设计中的应用 |
| |
| 引用本文： | 慕龙.基于UG的CAE技术在摇臂机构设计中的应用[J].机电工程技术,2012(10):8-10. |
| |
| 作者姓名： | 慕龙 |
| |
| 作者单位： | 新疆天业集团有限公司化工研究院,新疆石河子 832000 |
| |
| 摘 要： | 通过软件UG NX7.0建立实验平台摇臂机构的三维模型,并利用UG NX7.0的高级仿真模块对其进行结构受力分析,得到了摇臂的应力、应变、位移分布图,并在此基础上利用软件进行结构优化分析,为设计提供参数和依据。
|
| 关 键 词： | 摇臂 UGNX7.0 有限元分析 结构优化 |
Application of CAE Technology for Rocker Mechanism Design Based on UG |
| |
| MU Long.Application of CAE Technology for Rocker Mechanism Design Based on UG[J].Mechanical & Electrical Engineering Technology,2012(10):8-10. |
| |
| Authors: | MU Long |
| |
| Affiliation: | MU Long (Xinjiang Tianye (group) Co., Ltd. Research Institute of Chemical, Shihezi832000, China) |
| |
| Abstract: | This article used the software of UG NX7.0 to build a 3D model of experiment platform rocker mechanism, and by using UG NX7.0 senior simulation module to analyze its structure stress, obtained the rocker stress, strain and displacement distribution, and on this basis, the software is used to structure optimization analysis, to provide parameters and design basis. |
| |
| Keywords: | rocker mechanism UG NX7 0 finite element analysis structural optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
