INFLUENCE OF ELEVATED PRESSURE ON SORPTION IN DESICCANT WHEELS

Rotary desiccant wheels have been employed to dry pressurized air streams. In these systems, depending on the moisture content in the air stream and the operating pressure, condensation can occur in the regeneration portion of the wheel. In this article, a numerical method using an implicit finite-difference scheme is developed and applied that enables condensation to be detected and simulated in the regeneration portion of a desiccant wheel operating at high pressures. Using this model, performance analysis of desiccant wheel under these conditions is investigated. It is found that, depending on the value of the separation factor and regeneration temperature, condensation could occupy as much as 40% of regeneration section of the wheel. In this region, regeneration of the desiccant is not possible and usually dehumidification of regeneration air occurs. Also, as the operating pressure increases, the adsorption and desorption characteristics are dramatically affected and the optimum separation factor of desiccant material increases with operating pressure.