| 吸湿排汗聚酯纤维的生产技术 |
| |
| 引用本文： | 朱毅. 吸湿排汗聚酯纤维的生产技术[J]. 合成纤维, 2007, 36(12): 42-45 |
| |
| 作者姓名： | 朱毅 |
| |
| 作者单位： | 上海联吉合纤有限公司,上海,201419 |
| |
| 摘 要： | 介绍了吸湿排汗纤维的原理、制备方法及异形喷丝孔结构对聚酯纤维吸湿排汗性能的影响,分析了各道工艺对异形度的影响。生产实践表明:加入亲水性基团、降低纺丝温度、采用亲水性油剂等,不仅能增加纤维异形度,而且可提高纤维吸湿排汗效果。
|
| 关 键 词： | 聚酯纤维 吸湿排汗 异形度 |
| 文章编号： | 1001-7054（2007）12-0042-04 |
| 收稿时间： | 2007-08-27 |
| 修稿时间： | 2007-09-25 |
Discussion on Hygroscopic and Sweat Releasing Polyester Fiber |
| |
| ZHU Yi. Discussion on Hygroscopic and Sweat Releasing Polyester Fiber[J]. Synthetic Fiber in China, 2007, 36(12): 42-45 |
| |
| Authors: | ZHU Yi |
| |
| Abstract: | The theory and current manufacturing method of hygroscopic and sweat releasing polyester fiber were introduced. The influences of profiled spinneret orifice structure on the hygroscopic and dry performance were discussed. The influences of each process on degree of profile were analyzed. The results showed that degree of profile was increasde, hygroscopic and sweat release of polyester fiber were also inereased with adding hydrophilic group, reducing spinning temperature and using hydrophilic finish oil. |
| |
| Keywords: | polyester fiber hygroscopic and sweat releasing degree of profile |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《合成纤维》浏览原始摘要信息 |
|
点击此处可从《合成纤维》下载全文 |
