Abstract: | Efficient mesh motion techniques are a key issue to achieve satisfactory results in the arbitrary Lagrangian–Eulerian (ALE) finite element formulation when simulating large deformation problems such as metal‐forming. In the updated Lagrangian (UL) formulation, mesh and material movement are attached and an excessive mesh distortion usually appears. By uncoupling mesh movement from material movement, the ALE formulation can relocate the mesh to avoid distortion. To facilitate the calculation process, the ALE operator is split into two steps at each analysis time step: UL step (where deformation due to loading is calculated without convective terms) and Eulerian step (where mesh motion is applied). In this work, mesh motion is performed by new nodal relocation methods, developed for eight‐node hexahedral elements, which can move internal and boundary nodes, improving and concentrating the mesh in critical zones. After mesh motion, data is transferred from the UL mesh to the relocated mesh using an expansion of stresses in a Taylor's series. Two numerical applications are presented, comparing results of UL and ALE formulation with results found in the literature. Copyright © 2004 John Wiley & Sons, Ltd. |