Abstract: | This study demonstrates the successful use of back‐propagation artificial neural networks (BPANNs) in predicting the shrinkage and warpage of injection‐molded thin‐wall parts. The effects of structural parameters of a BPANN on the predictionaccuracy and the capability of a BPANN in determining the optimal process condition are also discussed. The training and testing data are obtained experimentally based on a Taguchi L27 (313) test schedule. The results show that the trained BPANN can successfully predict the shrinkage and warpage of injection‐molded thin‐wall parts. Comparing the prediction accuracies of the trained BPANN and C‐Mold software, it is noted that the trained BPANN predicts more accurately. In terms of determining the optimal process condition for minimizing the shrinkage and warpage of injected thin‐wall parts, the trained BPANN is also shown to give a better optimal process condition than Taguchi's method. Polym. Eng. Sci. 44:2029–2040, 2004. © 2004 Society of Plastics Engineers. |