| Abstract: | In this paper, a manipulability analysis of a new parallel‐type rolling mill, named “paramill,” in its conceptual design stage is investigated. The paramill considered uses two Stewart platforms (SPs) in opposite directions for the generation of 6 degree‐of‐freedom motions of individual work‐rolls. The objective of this new approach is to pursue an integrated control of the strip thickness, strip shape, pair‐crossing angle, uniform wear of the rolls, and tension of the strip. The forward/inverse kinematics problems are formulated. Two main kinematic parameters, the size of the base and the acute angle made by two neighboring joints for a given size of the work‐roll, have been determined in the way that the force and moment transmission from the actuators to the work‐rolls is maximized. © 2004 Wiley Periodicals, Inc. |
