| Abstract: | The breeder thermal performances under a purge line break have been analyzed for two blanket design options: a blanket design using a packed breeder bed and a blanket design using a sintered breeder product. Under a purge line break open to a vacuum environment, the packed bed breeder temperature exceeds its operating temperature limit at a faster rate than that of the sintered breeder blanket design for the same breeder temperature gradient. Depending on the breeder material and nominal operating conditions, the breeder reaches its maximum operating temperature in time ranging from 32 seconds to 125 seconds for a break area of 10 cm2 in packed bed designs. However for the sintered product design, the consequence of this transient might not result in the breeder exceeding its maximum operating temperature if a reasonable contact pressure could be established at the interface. To reduce the safety hazards, the tritium concentration build up in the vacuum vessel in conjunction with the purge gas pressure inside the blanket module should be used as a measure for initiating the reactor shutdown for this type of accident. The consequence of the purge line break outside the vacuum vessel on the breeder transient thermal performance is less significant because of a longer transient time involved. |
