| 清洗预处理对手表外观件表面镀类金刚石薄膜性能的影响 |
| |
| 引用本文： | 胡芳,代明江,林松盛,李福球,崔晓龙,鲍贤勇.清洗预处理对手表外观件表面镀类金刚石薄膜性能的影响[J].电镀与涂饰,2011,30(3):43-45. |
| |
| 作者姓名： | 胡芳 代明江 林松盛 李福球 崔晓龙 鲍贤勇 |
| |
| 作者单位： | 胡芳,代明江,林松盛,李福球,HU Fang,DAI Ming-iang,LIN Song-sheng,LI Fu-qiu(广州有色金属研究院,广东,广州,510651);崔晓龙,鲍贤勇,CUI Xiao-long,BAO Xian-yong(深圳市飞亚达(集团)股份有限公司,广东,深圳,518057) |
| |
| 基金项目： | 广东省教育部产学研结合项目 |
| |
| 摘 要： | 为解决手表外观件镀层的附着力和硬度不高而产生的膜层脱落和磨损露底等问题,采用阳极层流型气体离子源结合非平衡磁控溅射技术制备了类金刚石膜层,研究了镀前清洗工艺对膜层附着力和耐磨性能的影响.结果表明,所制备的类金刚石膜均匀亮黑,显微硬度为2 232 HV,摩擦系数为0.15.在同一镀膜工艺条件下,手表外观件经彻底清洗后,其...
|
| 关 键 词： | 手表外现件 类金刚石膜 非平衡磁控溅射 清洗预处理 附着力 抗振动磨损性 |
Effect of rinse pretreatment on performance of diamond-like carbon films deposited on watch appearance parts |
| |
| HU Fang,DAI Ming-iang,LIN Song-sheng,LI Fu-qiu,CUI Xiao-long,BAO Xian-yong.Effect of rinse pretreatment on performance of diamond-like carbon films deposited on watch appearance parts[J].Electroplating & Finishing,2011,30(3):43-45. |
| |
| Authors: | HU Fang DAI Ming-iang LIN Song-sheng LI Fu-qiu CUI Xiao-long BAO Xian-yong |
| |
| Affiliation: | HU Fang,DAI Ming-jiang*,LIN Song-sheng,LI Fu-qiu,CUI Xiao-long,BAO Xian-yong Guangzhou Research Institute of Non-ferrous Metals,Guangzhou 510651,China |
| |
| Abstract: | In order to solve the problems existing in coatings on watch appearance parts, which of low adhesion and hardness result in peeling-off and abrasion, diamond-like carbon (DLC) films were prepared by unbalanced magnetron sputtering technique with anodic laminar flow gas ion source. The effect of rinse process before plating on adhesion strength and wear resistance of DLC film was studied. The results showed that the DLC film is bright black and uniform, and has a hardness of 2 232 HV and a friction coefficie... |
| |
| Keywords: | watch appearance part diamond-like carbon (DLC) film unbalanced magnetron sputtering cleaning pretreatment adhesion strength vibration wear resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
