| 倒锥齿内花键的加工和工艺分析 |
| |
| 引用本文： | 杨有亮,淡花蕊.倒锥齿内花键的加工和工艺分析[J].机械制造,1996(8):25-26. |
| |
| 作者姓名： | 杨有亮 淡花蕊 |
| |
| 作者单位： | 洛阳第一拖拉机厂齿轮分厂!471004 |
| |
| 摘 要： | 倒锥齿内花键(内齿轮)是汽车、拖拉机为防止脱档而常用的方法。本文介绍三种倒锥齿内花键的加工工艺,工艺分析和测量方法。
|
| 关 键 词： | 倒锥齿内花键 内齿轮 齿加工 测量 插齿 |
The Machining Method And Technique Analfsis of Intermal Spline with Rerersed Taper Teeth |
| |
| Yang youliang Dan huarui.The Machining Method And Technique Analfsis of Intermal Spline with Rerersed Taper Teeth[J].Machinery,1996(8):25-26. |
| |
| Authors: | Yang youliang Dan huarui |
| |
| Affiliation: | Yang youliang Dan huarui |
| |
| Abstract: | The internal spline (internal gear) with reversed taper teeth is the general method used by autocar and tracter industry to prevent the meshing from dislocating. This paper introduces three method of machining technique, technique analysis and measuring for internal spline with reversed taper teeth. |
| |
| Keywords: | Internal Spline (Internal Gear)With Reversed Taper Teeth Machining of Reversed Taper Teeth Measuring of Reversed Taper Teeth |
| 本文献已被 CNKI 维普 等数据库收录！ |
