首页 | 本学科首页   官方微博 | 高级检索  
     

爆炸冲击波测试数据处理方法研究
引用本文:张立恒,王少龙,颜澎,周保顺.爆炸冲击波测试数据处理方法研究[J].弹箭与制导学报,2010,30(3).
作者姓名:张立恒  王少龙  颜澎  周保顺
作者单位:1. 第二炮兵装备研究院,北京,100085;第二炮兵工程学院,西安,710025
2. 第二炮兵装备研究院,北京,100085
3. 第二炮兵工程学院,西安,710025
摘    要:通过对爆炸冲击波测试信号常规处理方法的分析,提出了一种基于傅里叶分析的高低通滤波测试信号处理方法.该方法可以将冲击波信号从包含有大的背景噪声干扰的实测信号中提取出来,对爆炸波信号的处理具有很好的可操作性,其可行性与有效性在爆炸实验中得到了验证.

关 键 词:爆炸测试  爆炸冲击波  数据处理  滤波

Study on Blast Wave Test Data Processing Methods
ZHANG Liheng,WANG Shaolong,YAN Peng,ZHOU Baoshun.Study on Blast Wave Test Data Processing Methods[J].Journal of Projectiles Rockets Missiles and Guidance,2010,30(3).
Authors:ZHANG Liheng  WANG Shaolong  YAN Peng  ZHOU Baoshun
Affiliation:ZHANG Liheng1,2,WANG Shaolong1,YAN Peng1,ZHOU Baoshun2(1 The Second Artillery Equipment Academy,Beijing 100085,China,2 The Second Artillery Engineering College,Xi'an 710025,China)
Abstract:Through analysis of conventional blast test signal processing methods,a high-low pass filter signal processing method was proposed based on Flourier analysis.This new blast test data method can extract the shock wave signal from the measured signal that contains large background noise and has good operability.The application of the method in blast wave test verified the feasibility and effectiveness of the method.
Keywords:blast test  blast wave  data processing  filtering  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号