| 浅筒形件侧壁冲方孔模设计 |
| |
| 引用本文： | 羡东君. 浅筒形件侧壁冲方孔模设计[J]. 模具工业, 2003, 0(2): 24-25 |
| |
| 作者姓名： | 羡东君 |
| |
| 作者单位： | 安徽省东风机械总厂, 安徽合肥 230022 |
| |
| 摘 要： | 介绍了一种在浅筒形件筒壁上冲方孔的模具 ,分析比较了两种工艺方法的优劣 ,并介绍了模具工作过程及主要模具零件的设计
|
| 关 键 词： | 侧壁冲孔 楔块 凹模 |
| 文章编号： | 1001-2168(2003)02-0024-02 |
| 修稿时间： | 2002-09-05 |
Design of the Die for Piercing the Square Hole in the Side Wall of the Shallow Cylinder-Shaped Part |
| |
| XIAN Dong_jun. Design of the Die for Piercing the Square Hole in the Side Wall of the Shallow Cylinder-Shaped Part[J]. Die & Mould Industry, 2003, 0(2): 24-25 |
| |
| Authors: | XIAN Dong_jun |
| |
| Abstract: | A die for piercing a square hole in the side wall of the shallow cylinder_shaped part was introduced.The advantages and disadvantages of two technological methods for piercing the hole were analyzed and compared.The working process of the die and the design of some key parts of the die were stated. |
| |
| Keywords: | hole_piercing in side wall wedge matrix |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
