Microstructure and properties of the AlCrMoZrTi/(AlCrMoZrTi)N multilayer high-entropy nitride ceramics films deposited by reactive RF sputtering

The AlCrMoZrTi/(AlCrMoZrTi)N multilayer high-entropy nitride ceramic films (HENCFs) fabricated by reactive RF magnetron sputtering presented (200) preferentially oriented FCC crystal structures. With the increase in the modulation period, the nitrogen content and surface roughness of the multilayer films gradually increased, the template effect between the nanocrystalline and amorphous forms was weakened, and the multilayer interface structure decreased. The S4 film with a modulation period of 1500 nm had the highest hardness and modulus (16.6 and 225.7 GPa, respectively) and the highest H/E* and H³/E*² values. The results of friction experiments showed that the S1 film with the smallest modulation period had a stable friction coefficient and small wear rate on both Si and Cu substrates, and it exhibited the best friction and wear performance due to its low surface roughness, high toughness and compressive yield resistance, and dense multilayer structure. The friction mechanisms of the HECNFs on Si and Cu substrates were mainly adhesive wear, abrasive wear, and a small amount of oxidative wear.