Evaluation of mechanical properties of YSZ TBCs doped by different ratios of Eu3+ ions after isothermal oxidation

Thermal barrier coatings (TBCs) are essential to improve the thermal insulation performance of high-temperature components. Rare earth element (Eu³⁺) doped yttrium stabilized zirconia (YSZ) TBCs have been proved to be an ideal solution for non-destructive testing of internal damages. Based on this theory, two types of coatings deposited by air plasma spray (APS) on Hastelloy-X were investigated: (1) Eu³⁺ doped YSZ (dopant ratios 1 mol%, 2 mol%, 4 mol%, respectively), (2) traditional undoped 8YSZ. Isothermal oxidation treatment at 1100 °C, in increments of 10h until the failure of the coatings are conducted to evaluate the mechanical properties of different coatings. The microscopic morphology and phase of the coatings were analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD) patterns, respectively. The indentation testing methods were used to study the apparent interfacial fracture toughness and the hardness of the ceramic top coat. Results show that the Vickers hardness of the top coat increases with the decrease of porosity in the early stage and then decreases with the heat treatment time increasing in the long-term stage. Simultaneously, compared with the undoped 8YSZ coating, the fracture toughness increased with the dopant of Eu³⁺ ions increasing, from 1 mol% to 2 mol%, nevertheless, that of 4 mol% Eu³⁺ doped YSZ decreased compared with in the undoped 8 YSZ. For all types of specimens, the interfacial fracture toughness decreases with the increase of isothermal oxidation time. Results also indicate that the content of Eu³⁺ doping does not affect the microstructure and interfacial morphology of the YSZ coating as well as the growth law of thermally grown oxides (TGO). Furthermore, EDS detection found that the Eu³⁺ ions almost do not diffuse inside the TBCs system after isothermal oxidation treatment.