首页 | 本学科首页   官方微博 | 高级检索  
     

T91耐热钢析出物的热力学计算和平衡相分析
引用本文:郝珊,李国忠,王福明,李长荣.T91耐热钢析出物的热力学计算和平衡相分析[J].特殊钢,2008,29(3):16-18.
作者姓名:郝珊  李国忠  王福明  李长荣
作者单位:1北京科技大学冶金与生态工程学院,北京100083 ; 2江阴兴澄特种钢铁有限公司,江阴214429
基金项目:国家自然科学基金 , 高等学校博士学科点专项科研项目
摘    要:采用Thermo-Calc热力学计算软件,对191耐热钢(%:0.09C、8.57Cr、0.90Mo、0.19V、0.08Nb、0.04N)600~1600℃存在的平衡相M23C6和MX进行了热力学计算。结果表明,T91钢600~1600℃主要平衡析出相为M23C6和MX,M23C6开始析出温度860℃,MX为1200℃。MX相中首先析出富Nb碳氮化物,随后析出富V碳氮化物。随钢中Nb、V、N含量的提高,MX的数量和平衡开始析出温度均有提高,其中N的影响最为显著。

关 键 词:T91耐热钢  Thermo-Calc软件  M23C6  MX  
收稿时间:2007-11-09

Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91
Hao Shan,Li Guozhong,Wang Fuming,Li Changrong.Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91[J].Special Steel,2008,29(3):16-18.
Authors:Hao Shan  Li Guozhong  Wang Fuming  Li Changrong
Affiliation:1 School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing 100083 ; 2Jiangyin Xingcheng Iron and Steel Co Ltd, Jiangyin 214429
Abstract:The equilibrium phases M23 C6 and MX existing in heat-resistant steel T91 (0.09C, 8. 57Cr, 0.90Mo, 0.19V, 0. 08Nb, 0.04N) at 600 ~ 1 600 °C have been calculated by Thermo-Calc calculation software. Results show that the main equilibrium precipitated phases in steel T91 at 600 ~ 1 600 ℃ are M23C6 and MX, the initial precipitation temperature for M23 C6 is 860 °C and that for MX is 1 200℃ . In MX phase the rich Nb carbonitrides first precipitate then the rich V carbonitrides precipitate. With increasing Nb, V or N, the amount of MX and its equilibrium initial precipitated temperature increases, in which the effect of N is most obvious.
Keywords:
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号