首页 | 本学科首页   官方微博 | 高级检索  
     

复配溶剂萃取分离催化裂化油浆影响因素研究
引用本文:孙昱东. 复配溶剂萃取分离催化裂化油浆影响因素研究[J]. 中国炼油与石油化工, 2022, 24(1): 111-116
作者姓名:孙昱东
作者单位:中国石油大学(华东)化学工程学院
摘    要:The influence of solvent formulation, temperature, time and solvent-oil ratio on extract oil yields and aromatics contents were analyzed by four factors and three levels of orthorhombic method with Daqing FCC slurry as feedstock and extraction solvent preparing by N,N-dimethylformamide and anti-extractant. The regressive model of extract oil yields and aromatics contents to solvent formulation, temperature, time and solvent-oil ratio were established. The analysis result by response surface method showed that solvent formulation, temperature and solvent-oil ratio have obvious effect on extraction results and there was interaction between temperature and solvent-oil ratio on aromatics contents when FCC slurry extracted by mixed solvent, but the effect of time was not obvious. The model analysis showed that the optimality conditions for FCC slurry separation by mixed solvent were 2.3 of DMF/ anti-extractant, 62.8℃ of temperature, 3.2 of solvent-oil ratio and 35min of time. The prediction results was well consistent with the verification test.

关 键 词:溶剂复配  FCC油浆萃取  响应面法  萃取油收率  芳烃含量  
收稿时间:2021-08-05
修稿时间:2021-10-07

Influence Factors Analysis of FCC Slurry Separation by Mixed Solvent Extraction
Yu-dong SUN. Influence Factors Analysis of FCC Slurry Separation by Mixed Solvent Extraction[J]. China Petroleum Processing and Petrochemical Technology, 2022, 24(1): 111-116
Authors:Yu-dong SUN
Abstract:The influence of solvent formulation, temperature, time and solvent-oil ratio on extract oil yields and aromatics contents were analyzed by four factors and three levels of orthorhombic method with Daqing FCC slurry as feedstock and extraction solvent preparing by N,N-dimethylformamide and anti-extractant. The regressive model of extract oil yields and aromatics contents to solvent formulation, temperature, time and solvent-oil ratio were established. The analysis result by response surface method showed that solvent formulation, temperature and solvent-oil ratio have obvious effect on extraction results and there was interaction between temperature and solvent-oil ratio on aromatics contents when FCC slurry extracted by mixed solvent, but the effect of time was not obvious. The model analysis showed that the optimality conditions for FCC slurry separation by mixed solvent were 2.3 of DMF/ anti-extractant, 62.8℃ of temperature, 3.2 of solvent-oil ratio and 35min of time. The prediction results was well consistent with the verification test.
Keywords:Solvent formulation   FCC slurry extraction   Response surface method   Extract oil yield   Aromatic content  
点击此处可从《中国炼油与石油化工》浏览原始摘要信息
点击此处可从《中国炼油与石油化工》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号