Apparatus and initial results for pressurized planar electrochromatography

Pressurized planar electrochromatography (PPEC) is a new planar chromatographic technique in which the mobile phase is driven by electroosmotic flow, while the sorbent layer is pressurized in a manner that allows heat to flow from the layer through an electrically insulating, thermally conducting, sheet of aluminum nitride ceramic. A prototype apparatus for performing PPEC is described. Separation by PPEC is faster than by conventional TLC, and an example is presented of a 24-fold enhancement in the speed of separation. PPEC was performed on both regular and high-performance C18 layers, and the latter yield substantially faster separation. The sorbent layer requires conditioning at elevated temperature before use, and solute migration velocity increases with this temperature. The flow rate increases in a linear manner with increasing voltage and diminishes in a nonlinear manner with increasing pressure. Both electrical current and Joule heating diminish with increasing pressure, and the diminution of flow at high pressure can be compensated by an increase in voltage. PPEC is more efficient than classical TLC. Theoretical plate heights diminish with increasing Rf and are in the range 29-21 and 55-27 microm for the high-performance and regular plates, respectively. PPEC retains the advantages of classical TLC but has the ability to separate a substantially higher number of samples simultaneously. An example is presented on the separation of nine samples in 1 min on a 2.5 cm x 10 cm sorbent layer.