Fatigue crack growth behavior of a solid solution-strengthened nickel-base superalloy (Incoloy 825) |
| |
Authors: | L. Bartosiewicz A. R. Krause A. Spis J. Raghavan S. K. Putatunda |
| |
Affiliation: | (1) Ford Motor Company, Dearborn, Michigan;(2) Ford Motor Company, Dearborn, Michigan;(3) Department of Materials Science and Engineering, Wayne State University, Detroit, Michigan;(4) Department of Materials Science and Engineering, Wayne State University, Detroit, Michigan |
| |
Abstract: | Fatigue crack growth behavior of a solid solution-strengthened nickel-base superalloy (Incoloy 825)* was investigated. The investigation also examined the influence of heat treatment on resultant microstructures and the near-threshold fatigue crack growth behavior. In addition, the influence of load ratios(R), material strength, and grain size on fatigue threshold was studied. Compact tension specimens prepared from Incoloy 825 with transverse-longitudinal (TL) orientation in the as-received, as well as two different heat treated conditions, were used. The heat treatment studies revealed a peak hardness condition after solution treatment at 1200 °C for 1/2 hr, followed by aging at 600 °C for 434 hr. Among all the heat treated conditions, the fatigue threshold was the highest and the near-threshold crack growth rate was lowest in this peak aged condition. Fatigue threshold values were observed to decrease with an increase in load ratio, whereas an increased grain diameter resulted in a higher fatigue threshold. An earlier mathematical model was found applicable to characterize the relationship between load ratio and fatigue threshold. Preferential etching of grain boundary suggests formation of a thin film of carbide precipitation along the grain boundary region in the aged specimens. This carbide precipitation facilitated intergranular crack growth in these samples, resulting in higher roughness-induced crack closure. The highest fatigue threshold in the peak aged condition can be attributed to this large roughness-induced crack closure process. Incoloy 825 is a trademark for products of Huntington Alloys, Inc. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|