| 数控电解磨削ST10CH硬质合金试验研究 |
| |
| 引用本文： | 干为民,褚辉生,徐波,黄文波,杨小斌. 数控电解磨削ST10CH硬质合金试验研究[J]. 模具工业, 2010, 36(11): 68-71 |
| |
| 作者姓名： | 干为民 褚辉生 徐波 黄文波 杨小斌 |
| |
| 作者单位： | 1. 常州市特种加工重点试验室,江苏,常州,213002
2. 常州工利精机科技有限公司,江苏,常州,213161 |
| |
| 基金项目： | 常州市中小企业科技创新项目，常州国家高新区科技支撑项目 |
| |
| 摘 要： | 硬质合金具有高硬度、高强度和高耐磨等特点,传统的机械加工方法难以对其加工,现采用数控电解磨削方法对型号为ST10CH硬质合金进行加工试验研究,在分析电解液浓度、加工电压、电解液压力、进给速度、主轴转速等因素的基础上,通过正交试验对其优化,得到加工该材料的优化参数,并用优化后的参数分别对电解液温度和进给速度进行单因素试验,最终得到加工该材料的成形规律。
|
| 关 键 词： | 硬质合金 电解磨削 正交试验 |
NC electrochemical grinding of ST10CH carbide alloy |
| |
| GAN Wei-min,ZHU Hui-sheng,XU Bo,HUANG Wen-bo,YANG Xiao-bin. NC electrochemical grinding of ST10CH carbide alloy[J]. Die & Mould Industry, 2010, 36(11): 68-71 |
| |
| Authors: | GAN Wei-min ZHU Hui-sheng XU Bo HUANG Wen-bo YANG Xiao-bin |
| |
| Affiliation: | 1.Changzhou Key Laboratory of Nontraditional Machining,Changzhou,Jiangsu 213002,China;2.Changzhou Gongli Metal Product Technology Co.,Ltd,Changzhou,Jiangsu 213161, China) |
| |
| Abstract: | Carbide alloy is characteristic with high hardness,high strength and high wear resistance and is difficult to be machined by traditional methods.In this paper,study was made on the NC electrochemical grinding of ST10CH carbide alloy,based on analyzing the factors such as electrolyte concentration,machining voltage,electrolyte pressure,feed speed and spindle speed.By orthogonal experiments,optimized parameters of processing ST10CH carbide alloy were obtained,with which the experiments for electrolyte temperature and feed speed were conducted and finally,a forming law of ST10CH carbide alloy was obtained. |
| |
| Keywords: | carbide alloy electrochemical grinding orthogonal experiment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
