| 递推最小二乘法辨识连续带钢热镀锌退火炉模型参数 |
| |
| 引用本文： | 李训艳,周玉国,杨思源. 递推最小二乘法辨识连续带钢热镀锌退火炉模型参数[J]. 微型机与应用, 2011, 30(7) |
| |
| 作者姓名： | 李训艳 周玉国 杨思源 |
| |
| 作者单位： | 青岛理工大学自动化工程学院,山东青岛,266033 |
| |
| 摘 要： | 提出了用递推最小二乘法辨识连续带钢热镀锌退火炉模型参数.在已建立的连续带钢热镀锌退火炉数学模型的基础上,经过分析计算确定模型参数.考虑到最小二乘法的缺陷,选用递推最小二乘法进行参数辨识,并结合实例给出辨识结果和分析,证明了该方法的可行性.
|
| 关 键 词： | 热镀锌退火炉 数学模型 递推最小二乘法辨识 |
Identification the annealing furnace of continuous hot galvanizing using recursive least squares |
| |
| Li Xunyan,Zhou Yuguo,Yang Siyuan. Identification the annealing furnace of continuous hot galvanizing using recursive least squares[J]. Microcomputer & its Applications, 2011, 30(7) |
| |
| Authors: | Li Xunyan Zhou Yuguo Yang Siyuan |
| |
| Affiliation: | Li Xunyan,Zhou Yuguo,Yang Siyuan (College of Automation,Qingdao Technological University,Qingdao 266033,China) |
| |
| Abstract: | This paper presents a way of identifying continuous strip steel galvanized anneal furnace model parameters using recursive least squares. Based on continuous strip steel galvanized anneal furnace mathematical model, the parameters of the model are determined after a series of the analysis and calculation. Considering the defects of the least-squares method, choosing recursive least square method identifies parameters. By identification results and analysis of examples, the results prove the feasibility of t... |
| |
| Keywords: | continuous annealing furnace mathematical model recursive least squares |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
