| 混杂比对单向碳-玻层间混编复合材料0°压缩和弯曲性能的影响 |
| |
| 引用本文： | 马腾,贾智源,关晓方,刘世扬,李炜.混杂比对单向碳-玻层间混编复合材料0°压缩和弯曲性能的影响[J].复合材料学报,2017,34(4):758-765. |
| |
| 作者姓名： | 马腾 贾智源 关晓方 刘世扬 李炜 |
| |
| 作者单位： | 1. 东华大学 纺织学院, 上海 201620;2. 民用航空复合材料协同创新中心, 上海 201620;3. 产业用纺织品教育部工程研究中心, 上海 201620;4. 中材科技风电叶片股份有限公司, 北京 102101 |
| |
| 基金项目： | 上海市科学技术委员会优秀技术带头人计划，软科学研究基地项目 |
| |
| 摘 要： | 本文研究了相同铺层方式下不同混杂比对单向碳-玻(碳纤维-玻璃纤维)层间混编复合材料的0°压缩和弯曲性能的影响。以碳-玻层间混编形式向纯玻纤织物中混入碳纤维,对复合材料的0°压缩强度、0°压缩模量、弯曲强度和弯曲模量均有一定的提高作用,三种碳纤混杂比不同的复合材料0°压缩强度较纯玻纤结构分别提高了22.72%、26.95%、11.43%,混杂比不同所导致的试样破坏程度也各不相同。混杂复合材料0°压缩模量随碳纤含量增加逐渐增大。三种碳纤混杂比复合材料弯曲强度基本一致,而弯曲弹性模量随碳纤含量增加逐渐增大。
|
| 关 键 词： | 碳-玻混杂复合材料 0° 压缩性能 弯曲性能 混杂比 碳纤维 |
| 收稿时间： | 2016-05-11 |
Effects of hybrid ratio on the axial compressed and flexural properties of unidirectional inter-layer carbon-glass hybrid composites |
| |
| MA Teng,JIA Zhiyuan,GUAN Xiaofang,LIU Shiyang,LI Wei.Effects of hybrid ratio on the axial compressed and flexural properties of unidirectional inter-layer carbon-glass hybrid composites[J].Acta Materiae Compositae Sinica,2017,34(4):758-765. |
| |
| Authors: | MA Teng JIA Zhiyuan GUAN Xiaofang LIU Shiyang LI Wei |
| |
| Affiliation: | 1. College of Textiles, Donghua University, Shanghai 201620, China;2. Center for Civil Aviation Composites, Shanghai 201620, China;3. Engineering Research Center of Technical Textiles of Ministry of Education, Shanghai 201620, China;4. Sinomatech Wind Power Blade Co.Ltd., Beijing 102011, China |
| |
| Abstract: | According to the same layup structure,the axial compression and flexural properties of the unidirectional inter-layer carbon-glass hybrid composite with various hybrid ratios were inverstigated.The carbon fibers were introduced into the warp knitted glass fiber fabric.It is found that the carbon fibers can improve the strength and modulus of the axial compression and flexure in the hybrid composites.Compared with the pure glass fiber,the axial compressed strength of the hybrid composites with three different hybrid ratios increase by 22.72 ％,26.95 ％ and 11.43％,respectively.Different hybrid ratios bring about different damge modes.The axial compressed and flexural modulus of the hybrid composites both increase with the increase of the carbon fiber content.The flexural strength of the hybrid composites with different hybrid ratios keep consistent and increase unobviously. |
| |
| Keywords: | carbon-glass hybrid composite axial compressed properties flexural properties hybrid ratio carbon fiber |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
|
