首页 | 本学科首页   官方微博 | 高级检索  
     

二维C/SiC复合材料在冲击拉伸下的损伤过程
引用本文:陈煊,陈超,程礼,陈卫. 二维C/SiC复合材料在冲击拉伸下的损伤过程[J]. 复合材料学报, 2017, 34(2): 400-405. DOI: 10.13801/j.cnki.fhclxb.20160606.002
作者姓名:陈煊  陈超  程礼  陈卫
作者单位:1. 空军工程大学 航空航天工程学院, 西安 710038;2. 先进航空发动机协同创新中心, 北京 100191
基金项目:国家自然科学基金青年项目,陕西省自然科学基金,中国博士后科学基金
摘    要:利用分离式霍普金森拉杆实验装置(SHTB)和超高速照相机,对二维C/SiC复合材料进行了冲击拉伸力学性能实验研究,同时结合其宏观力学行为,分析了在冲击拉伸载荷作用下的损伤破坏过程。结果表明:材料的应力-应变曲线呈明显的非线性特征,其内部损伤破坏和裂纹扩展过程分为四个阶段:损伤积累于第一阶段,裂纹起源于第二阶段,屈服失效于第三个阶段,快速扩展于第四个阶段。

关 键 词:C/SiC复合材料  冲击拉伸  霍普金森拉杆  损伤过程  超高速相机  
收稿时间:2016-02-22

Fracture damage of two dimensional C/SiC composites under dynamic loading
Chen Xuan,Chen Chao,Cheng Li,Chen Wei. Fracture damage of two dimensional C/SiC composites under dynamic loading[J]. Acta Materiae Compositae Sinica, 2017, 34(2): 400-405. DOI: 10.13801/j.cnki.fhclxb.20160606.002
Authors:Chen Xuan  Chen Chao  Cheng Li  Chen Wei
Affiliation:1. College of Aeronautics and Astronautics Engineering, Air Force Engineering University, Xi'an 710038, China;2. Co-Innovation Center for Advanced Aero-Engine, Beijing 100191, China
Abstract:The dynamic tensile properties of 2D C/SiC composites were investigated by means of Split Hopkinson Tensile Bar (SHTB)and ultra high-speed camera.Based on its macro mechanic behavior,the failure process of the specimen under dynamic tensile loading was analyzed.The experimental results indicate that the stress-strain curve is obviously non-linear,and examination of the failure process of the specimen helps define the four phases of crack propagation,namely,the damage accumulation phase,crack initiation phase,yield failure phase and crack fast spreading phase.
Keywords:C/SiC composite  impact tensile loading  SHTB  failure process  ultra high-speed camera
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《复合材料学报》浏览原始摘要信息
点击此处可从《复合材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号