首页 | 本学科首页   官方微博 | 高级检索  
     

AZ31B镁合金塑性变形动态再结晶的实验研究
引用本文:刘晓霏,严巍,陈国学.AZ31B镁合金塑性变形动态再结晶的实验研究[J].塑性工程学报,2005,12(3):10-13.
作者姓名:刘晓霏  严巍  陈国学
作者单位:清华大学,机械工程系,北京,100084
摘    要:通过不同应变速率和不同温度下的轴对称压缩试验,研究了AZ31B镁合金塑性变形与动态再结晶的相互依赖关系。研究证实,温度T在200℃~400℃区间、变形程度ε约0.2左右时,开始出现动态再结晶(DRX)现象。随变形程度的增加,DRX晶粒不断增多,材料呈现明显的软化趋势,流动应力下降。当DRX过程完成以后,继续变形,材料又出现硬化行为。为镁合金塑性变形组织演变的定量研究打下了基础。

关 键 词:AZ31B  塑性变形  动态再结晶  轴对称压缩
文章编号:1007-2012(2005)03-0010-04
修稿时间:2004年9月16日

The experimental study on recrystallization of magnesium alloy AZ31B during plastic deformation
LIU Xiao-fei,YAN Wei,CHEN Guo-xue.The experimental study on recrystallization of magnesium alloy AZ31B during plastic deformation[J].Journal of Plasticity Engineering,2005,12(3):10-13.
Authors:LIU Xiao-fei  YAN Wei  CHEN Guo-xue
Abstract:The relationship between the dynamic recrystallization(DRX)and plastic deformation of the magnesium alloy AZ31B by axisymmetric compressiontests at different strain rate and different temperature is investigated. Studies show that AZ31B presents dynamic recrystallization behavior at 200~400℃ in temperature and around 0.2 in strain. With deformation increased, amount of DRX grains arises, the materials presents obvious tendency of softening, and flow stress declines as well. After the completion of DRX process, the material is hardened again if deformation continues. This paper provides the foundation for the quantitative analysis of microstructure evolution of magnesium alloys during plastic deformation.
Keywords:AZ31B  plastic deformation  dynamic recrystallization  axisymmetric compression
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号