| 弯曲件成形工艺分析与模具设计 |
| |
| 引用本文： | 李素丽,刘伟. 弯曲件成形工艺分析与模具设计[J]. 模具工业, 2011, 37(3): 47-49,59 |
| |
| 作者姓名： | 李素丽 刘伟 |
| |
| 作者单位： | 陕西国防工业职业技术学院,陕西,西安,710302 |
| |
| 摘 要： | 分析了弯曲件的成形工艺,介绍了由剪板、落料、冲方孔、压包、折弯5道主要工序组成的冲压工艺方案,阐述了每道工位的工艺计算和模具设计。采用此工艺方案和模具结构,显著提高了弯曲件生产效率和产品质量。
|
| 关 键 词： | 弯曲件 模具设计 落料 冲方孔 压包 |
Analysis of forming technique and design of die for bent part |
| |
| LI Su-li,LIU Wei. Analysis of forming technique and design of die for bent part[J]. Die & Mould Industry, 2011, 37(3): 47-49,59 |
| |
| Authors: | LI Su-li LIU Wei |
| |
| Affiliation: | LI Su-li,LIU Wei(Shaanxi Institute of Technology,Xi'an,Shaanxi 710302,China) |
| |
| Abstract: | The forming technique of a bent part was analyzed and a stamping scheme combining shearing,blanking,piercing of square hole,pressure packaging and flexing and bending process was stated.The technological calculation and die design for each process were described. |
| |
| Keywords: | bent part die design blanking piercing of square hole pressure packaging |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
