测量环多个缺口精冲模设计 |
| |
引用本文: | 张正威,孙恒,郝庆明. 测量环多个缺口精冲模设计[J]. 模具制造, 2011, 11(3): 16-18 |
| |
作者姓名: | 张正威 孙恒 郝庆明 |
| |
作者单位: | 武汉华夏精冲技术有限公司,湖北武汉,430415 |
| |
摘 要: | 分析了测量环的精冲成形工艺,确定其关键工艺为零件圆周上8个缺口的精冲。阐明了多个缺口的精冲模具结构及工作原理。实践证明:多个缺口的精冲模具结构合理,能保证产品质量,生产效率高。
|
关 键 词: | 测量环 精冲 缺口冲裁 模具设计 |
Design of Fine-Blanking Die for the Notch of Survey Ring |
| |
Abstract: | Analyzed the forming technique of a survey ring and identified that the blanking of eight notches is the critical step.The fine-blanking die structure and working procedure were described.Production proved that the fine-blanking die structure of notch is reasonable,reliable and can make quality of products efficiently. |
| |
Keywords: | survey ring fine-blanking notch blanking die designing |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|