| 汽车管路胎具设计系统的开发与应用 |
| |
| 引用本文： | 刘明,廖敦明,彭波,钱高峰,刘庆波.汽车管路胎具设计系统的开发与应用[J].模具工业,2011,37(3):11-15. |
| |
| 作者姓名： | 刘明 廖敦明 彭波 钱高峰 刘庆波 |
| |
| 作者单位： | 1. 华中科技大学材料成形与模具技术国家重点实验室,湖北,武汉,430074
2. 武汉邦迪管路系统有限公司,湖北,武汉430056 |
| |
| 摘 要： | 在分析胎具设计的特点和要求的基础上,提出UG平台下进行胎具设计的一般方法,并以UGNX5.0作为平台,开发出基于胎具设计方法的汽车管路胎具智能化设计系统。利用该系统可实现管路胎具自动化设计,并可模拟设计过程,预测设计缺陷。
|
| 关 键 词： | 汽车管路 UG 胎具设计系统 二次开发 |
Development and application of damping fixture design system applied to automotive pipeline |
| |
| LIU Ming,LIAO Dun-ming,PENG Bo,QIAN Gao-feng,LIU Qing-bo.Development and application of damping fixture design system applied to automotive pipeline[J].Die & Mould Industry,2011,37(3):11-15. |
| |
| Authors: | LIU Ming LIAO Dun-ming PENG Bo QIAN Gao-feng LIU Qing-bo |
| |
| Affiliation: | LIU Ming1,LIAO Dun-ming1,PENG Bo1,QIAN Gao-feng2,LIU Qing-bo2(1.State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong Universityof Science and Technology,Wuhan,Hubei 430074,China,2.Wuhan Bundy Fluid Systems Co.,Ltd,Hubei 430056,China) |
| |
| Abstract: | Based on analysis on the characteristic and requirement for design of clamping fixture,an intelligent design system for clamping fixture of automotive pipeline was developed on the platform UG NX5.0,in which way automatic and intelligent design of automotive pipeline clamping fixture is realized and the design process is simulated to predict design defects or errors. |
| |
| Keywords: | UG |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
