| 20#钢激光熔覆-重熔Ni基涂层及其高温磨损行为 |
| |
| 引用本文： | 张小彬,臧晨峰,刘常升.20#钢激光熔覆-重熔Ni基涂层及其高温磨损行为[J].表面技术,2010,39(1):1-4. |
| |
| 作者姓名： | 张小彬 臧晨峰 刘常升 |
| |
| 作者单位： | 重庆理工大学,重庆,400050;东北大学,各向异性与织构工程教育部重点实验室,沈阳,110004 |
| |
| 基金项目： | 国家自然科学基金(50274028) |
| |
| 摘 要： | 应用激光熔覆法,采用镍基NiCrSiB粉末,在20#钢表面制备了熔覆涂层,并用激光重熔涂层。观察了熔覆-重熔层的形貌,检测了其相组成和高温耐磨性能,结果表明:所制得熔覆-重熔层组织均一、致密,与基体形成了良好的冶金结合;经重熔处理后,熔覆层表面的裂纹显著减少;熔覆-重熔层的硬度提高到基体的5倍,高温磨损率约为基体的1/3。熔覆-重熔层耐磨能力的增强除因其与基体形成了良好的冶金结合和硼化物、硼碳化物等析出相的强化作用外,也是重熔减少微裂纹的结果。
|
| 关 键 词： | 20~#钢 激光熔覆 NiCrSiB 重熔 高温磨损 |
| 收稿时间： | 2009/10/12 0:00:00 |
| 修稿时间： | 2010/2/10 0:00:00 |
Ni-based Laser Cladding-remelting Layers on 20 Steel and Its High Temperature Abrasive-wear Behavior |
| |
| ZHANG Xiao-bin,ZANG Chen-feng and LIU Chang-sheng.Ni-based Laser Cladding-remelting Layers on 20 Steel and Its High Temperature Abrasive-wear Behavior[J].Surface Technology,2010,39(1):1-4. |
| |
| Authors: | ZHANG Xiao-bin ZANG Chen-feng and LIU Chang-sheng |
| |
| Affiliation: | ZHANG Xiao-bin1,ZANG Chen-feng2,LIU Chang-sheng2(1.Chongqing University of Technology,Chongqing 400050,China,2.Key Laboratory for Anisotropy , Texture of Materials(Ministry of Education),Northeastern University,Shenyang 110004,China) |
| |
| Abstract: | Ni-based alloy laser cladding layer and laser cladding-remelting layer were made on surface of 20 steel specimens using NiCrSiB powder.Phase characteristics,high temperature abrasive-wear behavior and surface morphologies after abrasive-wearing of the layers were investigated and the results show that laser cladding-remelting layer has dense microstructure,and has metallurgical combination with 20 steel substrate.There is much less cracks in laser cladding-remelting layer after remelting process.Micro-hardn... |
| |
| Keywords: | 20 steel Laser cladding NiCrSiB Remelting High temperature abrasive-wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
