Electron-specimen interactions in low-voltage scanning electron microscopy |
| |
Authors: | R. B ngeler,U. Golla,M. K ssens,L. Reimer,B. Schindler,R. Senkel,M. Spranck |
| |
Affiliation: | R. Böngeler,U. Golla,M. Kässens,L. Reimer,B. Schindler,R. Senkel,M. Spranck |
| |
Abstract: | Measurements of the electron range R, and the backscattering coefficient η and the secondary electron yield δ at normal and tilted incidence for different elements show characteristic differences for electron energies in the range of 0.5 to 5 keV, compared with energies larger than 5 keV. The backscattering coefficient does not increase monotonically with increasing atomic number; for example, the secondary electron yield shows a lesser increase with increasing tilt angle. This can be confirmed in back-scattered electron (BSE) and secondary electron (SE) micrographs of test specimens. The results are in rather good agreement with Monte Carlo simulations using elastic Mott cross-sections and a continuous-slowing-down model with a Rao Sahib-Wittry approach for the stopping power at low electron energies. Therefore, this method can be used to calculate quantities of BSE and SE emission, which need a larger experimental effort. Calculations of the angular distribution of BSEs show an increasing intensity with increasing atomic number at high takeoff angles than expected from a cosine law that describes the angular characteristics at high electron energies. When simulating the energy distribution of BSEs, the continuous-slowing-down model should be substituted by using an electron energy-loss spectrum (EELS) that considers plasmon losses and inner-shell ionizations individually (single-scattering-function model). The EELS can be approached via the theory for aluminium or from EELS spectra recorded in a transmission electron microscope for other elements. Measurements of electron range Rα En of 1 to 10 keV electrons are obtained from transmission experiments with thin films of known mass thickness. In agreement with other authors the exponent n is lower than at higher electron energies. |
| |
Keywords: | low-voltage SEM elastic scattering Monte Carlo simulation electron range backscattering coefficient |
|
|