| Abstract: | Blends of nylon 6 (Ny6) with poly(acrylic acid) (PAA) were prepared in film form from solutions in a mixture of formic acid and water by evaporating the solvent. The miscibility and phase constitution of the binary blends obtained over a wide composition range (5/95–95/5) were examined by wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), and dynamic mechanical measurements. A Ny6 homopolymer film and Ny6/PAA blends with PAA concentrations ≥ 50 wt% exhibited a WAXD profile stemmed from the coexistence of two different crystalline modifications of Ny6, i.e. the α and γ forms. Above 50 wt% PAA content, the solution-cast blends showed no definite crystallinity. It was found by DSC thermal analysis that the polymer pair is substantially miscible in the non-crystalline state, since a single glass transition temperature (Tg) was situated between the Tgs of the two homopolymers at every composition; however, the Tg versus composition plots did not follow a monotonic function but yielded a peak maximum at a PAA concentration of c. 25 wt%. In order to interpret this phenomenon, attention was given to the following point revealed by dynamic mechanical measurements: at the compositions of Ny6/PAA = 100/0–50/50, a phase of low regularity such as a nematic structure is formed in the cast films. |
