|
|||||
|
|
| 发泡量对HIPS及其复合材料微发泡行为的影响 | |
| 引用本文： | 谢利莎,何力,龚维,柯昌月,武毅,郭于林,张纯.发泡量对HIPS及其复合材料微发泡行为的影响[J].塑料科技,2012,40(5):65-69. |
| 作者姓名： | 谢利莎 何力 龚维 柯昌月 武毅 郭于林 张纯 |
| 作者单位： | 1. 贵州大学化学与化工学院,贵州贵阳,550003 2. 国家复合改性聚合物材料工程技术研究中心,贵州贵阳,550014 3. 贵州大学材料与冶金学院,贵州贵阳,550003 |
| 摘 要： | 采用化学发泡法制备出高冲击强度聚苯乙烯(HIPS)微发泡材料及HIPS/纳米有机蒙脱土(nano-OMMT)复合微发泡材料。研究了发泡量对HIPS及其复合材料微发泡行为的影响。结果表明:随着发泡量的增加,发泡材料呈现欠发泡、均衡发泡、过发泡状态。发泡量取10%时,复合材料的发泡效果最好。nano-OMMT在发泡过程中起到成核剂的作用,促进泡孔成核,有效地改善了发泡质量。 |
| 关 键 词： | 高冲击强度聚苯乙烯 化学发泡法 发泡量 发泡行为 |
Effect of Foam Amount on the Micro-foam Behavior of HIPS and Its Composites |
|
| Xie Lisha , He Li , Gong Wei , Ke Changyue , Wu Yi , Guo Yulin , Zhang Chun.Effect of Foam Amount on the Micro-foam Behavior of HIPS and Its Composites[J].Plastics Science and Technology,2012,40(5):65-69. | |
| Authors: | Xie Lisha He Li Gong Wei Ke Changyue Wu Yi Guo Yulin Zhang Chun |
| Affiliation: | 1 School of Chemistry and Chemical Engineering,Guizhou University,Guiyang 550003,China 2 National Engineering Research Center for Compounding and Modification of Polymer Materials,Guiyang 550014,China 3 The Materials and Metallurgy College,Guizhou University,Guiyang 550003,China |
| Abstract: | The HIPS micro-foam material and HIPS/nano-OMMT composite micro-foam materials were prepared by use of chemical foaming method.The effect of foam amount on the micro-foam behavior of HIPS and its composites was studied.The results show that: the foam material appears the less foaming state,balance foaming state and over foaming state with the increasing of foam amount;when the foam amount is 10%,the foaming effect of the composites is the best.During the foaming process,nano-OMMT plays a role of nucleating agent which can promote foam nucleation and effectively improve the foaming quality. |
| Keywords: | High impact strength polystyrene Chemical foaming method Foam amount Foaming behavior |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |