| 基于Pro／E带内扣的手机后壳注射模设计 |
| |
| 引用本文： | 张赐成.基于Pro／E带内扣的手机后壳注射模设计[J].模具制造,2008,8(10):5-8. |
| |
| 作者姓名： | 张赐成 |
| |
| 作者单位： | 五邑大学机电系,广东五邑,529000 |
| |
| 摘 要： | 以NOKIA手机后壳为例，介绍了基于Pro／E的带内扣塑件的注射模设计，设计过程中采用了很多设计技巧，对类似模具设计有一定的指导意义。
|
| 关 键 词： | Pro/E 内扣 注射模 分型面 滑块 |
Design of Injection Mold of the Mobile Phone Back-Shell with Inside Raise Based on Pro/E |
| |
| Zhang Cicheng.Design of Injection Mold of the Mobile Phone Back-Shell with Inside Raise Based on Pro/E[J].Die & Mould Manufacture,2008,8(10):5-8. |
| |
| Authors: | Zhang Cicheng |
| |
| Abstract: | Taking the mobile phone back-shell with inside raise as an example, introduced injection mold design based on Pro/E, adopted a lot of design skills in the designing course, it had a certain guide function to the similar mold design. |
| |
| Keywords: | Pro/E |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
