首页 | 本学科首页   官方微博 | 高级检索  
     

焊接加固热作用对工形截面压弯钢构件承载性能的影响
引用本文:蒋立,王元清,戴国欣,张天申,石永久. 焊接加固热作用对工形截面压弯钢构件承载性能的影响[J]. 土木建筑与环境工程, 2016, 38(4): 96-107. DOI: 10.11835/j.issn.1674-4764.2016.04.015
作者姓名:蒋立  王元清  戴国欣  张天申  石永久
作者单位:1. 重庆市设计院,重庆 400015; 重庆大学 土木工程学院,重庆 400045;2. 清华大学 土木工程安全与耐久教育部重点实验室 土木工程系,北京,100084;3. 重庆大学 土木工程学院,重庆,400045
基金项目:《钢结构加固设计规范》国家标准管理组科研专项课题(No.2013-1)@@@@Specialized Funding Research of National Standards Management Group on Code for Design of Strengthening Steel Structure (2013-1)
摘    要:为研究焊接加固热作用及不同初始负载对工字形压弯钢柱承载性能的影响,基于考虑热影响的热结构耦合分析方法进行了热源模型热输入改进,并考虑初始几何缺陷、初始残余应力及摩擦等,完成了不同负载下焊接加固的3个工字形压弯钢柱的模拟分析。研究了焊接位移时程、腹板应力应变重分布及荷载位移关系,通过有限元分析与相应试验结果对比验证,进而获得了试验无法获得的焊接温度场、翼缘与加固板间的焊接应力应变重分布以及翼缘边缘屈服承载力等结果,并将承载力结果与规范计算结果对比,考察了现有设计方法。结果表明,焊接顺序决定焊接变形的发展过程,焊接热输入和初始负载共同决定持载焊接的位移变化范围和焊接残余变形的大小;初始负载越大,应力应变重分布往偏心受力方向发展更多,承载力越低,而初始残余应力不影响极限承载力;采用考虑热影响的有限元方法具有一定可行性和总体安全性,规范设计方法仍有可提升空间。

关 键 词:钢结构加固  负载下  焊接热作用  压弯构件  承载性能  有限元分析
收稿时间:2016-02-18

Analysis of welding heat effect on load-carrying behavior of I section steel beam-columns strengthened by welding
Jiang Li,Wang Yuanqing,Dai Guoxin,Zhang Tianshen and Shi Yongjiu. Analysis of welding heat effect on load-carrying behavior of I section steel beam-columns strengthened by welding[J]. Journal of Civil,Architectrual & Environment Engineering, 2016, 38(4): 96-107. DOI: 10.11835/j.issn.1674-4764.2016.04.015
Authors:Jiang Li  Wang Yuanqing  Dai Guoxin  Zhang Tianshen  Shi Yongjiu
Affiliation:Chongqing Architectural Design Institute, Chongqing 400015, P. R. China,Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry;Department of Civil Engineering, Tsinghua University, Beijing 100084, P. R. China,Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry;Department of Civil Engineering, Tsinghua University, Beijing 100084, P. R. China and Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry;Department of Civil Engineering, Tsinghua University, Beijing 100084, P. R. China
Abstract:In order to investigate the influence of reinforcement welding heat effect and different initial load on load-carrying behavior of I section steel beam-columns,three specimens strengthened by welding while under different load were simulated.Based on the thermal-structural coupling method considering heat effect,the analysis improved thermal input of heat source model and also considered initial geometric imperfection,initial residual stress and friction.Time history of displacement during welding,web stress-strain redistribution and load-displacement relationship were discussed,and meanwhile the effectiveness of the finite element analyses (FEA ) were verified by comparing the FEA results and test results. Furthermore,welding temperature field,stress-strain redistribution between flange and strengthening plate and flange margin yield capacity,which could not be measured by test,were acquired.And by comparison of bearing capacity results and code calculation results,the present design methods were discussed.The results showed that welding strengthening procedure decided the development of welding residual deformation,while thermal input and initial load effected the range of displacement change during welding under load and magnitude of welding residual deformation. Higher initial load propelled the development of stress-strain redistribution toward the eccentric loading direction,thus leading to lower bearing capacity.However,initial residual stress had little effect on ultimate capacity.FEA method considering heat effect showed certain practicability and overall security,and code design method remained space for improvement still.
Keywords:strengthening steel structure  under load  welding heat effect  beam-column  load-carrying behavior  finite element analysis
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《土木建筑与环境工程》浏览原始摘要信息
点击此处可从《土木建筑与环境工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号