首页 | 本学科首页   官方微博 | 高级检索  
     

喷射成形工艺参数及热挤压制度对8009耐热铝合金的组织及性能的影响
引用本文:朱宝宏,熊柏青,张永安,刘红伟,石力开,孙玉峰.喷射成形工艺参数及热挤压制度对8009耐热铝合金的组织及性能的影响[J].稀有金属,2003,27(6):692-695.
作者姓名:朱宝宏  熊柏青  张永安  刘红伟  石力开  孙玉峰
作者单位:1. 北京有色金属研究总院国家有色金属复合材料中心,北京,100088
2. 中国科学院力学研究所国家微重力实验室,北京,100080
基金项目:国家“973”计划“提高铝材质量基础研究”资助项目 (G19990 64 90 5 3 )
摘    要:采用喷射成形方法制备了A1-8.5Fe-1.4v-1.7Si(8009)耐热铝合金,研究了喷射成形工艺参数及沉积坯件的热挤压工艺对材料的微观组织及性能的影响。结果表明:喷射成形工艺能够有效地抑制8009合金中粗大的富铁相的析出,获得均匀细小的组织;当喷射成形工艺参数选择适当时,沉积坯件具有良好的成形性与致密度,在随后的热挤压过程中,通过较低的挤压比即可使材料达到全致密。合金经过热挤压后,在室温及高温下均具有良好的力学性能。

关 键 词:喷射成形  热挤压工艺  Al-Fe-V-Si合金  耐热铝合金
文章编号:0258-7076(2003)06-0692-04
修稿时间:2003年6月10日

Effect of Spray Forming and Hot Extrusion Process Parameters upon Microstructure and Mechanical Properties of 8009 Alloy
Zhu Baohong ,Xiong Baiqing ,Zhang Yongan ,Liu Hongweia,Shi Likai ,Sun Yufeng.Effect of Spray Forming and Hot Extrusion Process Parameters upon Microstructure and Mechanical Properties of 8009 Alloy[J].Chinese Journal of Rare Metals,2003,27(6):692-695.
Authors:Zhu Baohong  Xiong Baiqing  Zhang Yongan  Liu Hongweia  Shi Likai  Sun Yufeng
Affiliation:Zhu Baohong 1*,Xiong Baiqing 1,Zhang Yongan 1,Liu Hongweia1,Shi Likai 1,Sun Yufeng 2
Abstract:Heat resistant Al 8.5Fe 1.4V 1.7Si (namely 8009) alloys were prepared by spray forming process. The effects on the microstructure and mechanical properties from the spray forming and hot extrusion processes parameters were investigated. The results show that some coarse rich Fe element phases were eliminated, and the microstructure is very homogeneously and fine. When the parameters of the spray forming process are suitable, the as deposited alloys have good forming properties and high density, and can be compacted completely with low hot extrusion rate. The alloys have good mechanical properties at both room temperature and high temperature.
Keywords:spray forming process  hot extrusion process  Al  Fe  V  Si alloy  heat  resistant aluminum alloy
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号