| 风扇叶注塑模设计 |
| |
| 引用本文： | 范淼彬,王蕾. 风扇叶注塑模设计[J]. 塑料科技, 2013, 0(4): 94-97 |
| |
| 作者姓名： | 范淼彬 王蕾 |
| |
| 作者单位： | 台州学院机械工程学院 |
| |
| 摘 要： | 分析了风扇叶的成型工艺特点,介绍了其注塑模具的结构设计和工作过程。该塑件有10个叶片,因此结构复杂,故其模具设计为一模一腔、潜伏式浇口、多点进胶方式,并采用斜导柱侧抽芯和滑块进行塑件成型;由于制件壁较薄,由推杆直接顶出塑件。该模具结构合理,运行可靠。
|
| 关 键 词： | 风扇叶 注塑模 一模一腔 滑块 侧抽芯 |
Design of Injection Mould for Fan Blades |
| |
| Fan Miaobin,Wang Lei. Design of Injection Mould for Fan Blades[J]. Plastics Science and Technology, 2013, 0(4): 94-97 |
| |
| Authors: | Fan Miaobin Wang Lei |
| |
| Affiliation: | School of Mechatronics Engineering,Taizhou University,Taizhou 318000,China |
| |
| Abstract: | The technological characteristics of the moulded part of fan blades were analyzed,and the structure design and operating process of the injection mould were introduced.The structure of the molded part is complex because of its 10 blades,so feeding by multiple gate.The mould features as one cavity in one mould,feeding by submarine gate,moulding by the side core pulling and sliders,and using ejection pin because of its thin wall.The mould structure is rational,and the operation is reliable. |
| |
| Keywords: | Fan blades Injection mould One cavity in one mould Slider Side core pulling |
| 本文献已被 CNKI 等数据库收录！ |
|
