| 分切打叶工艺设备的研究与应用 |
| |
| 引用本文： | 张忠峰,张世成,齐海涛. 分切打叶工艺设备的研究与应用[J]. 烟草科技, 2011, 0(6) |
| |
| 作者姓名： | 张忠峰 张世成 齐海涛 |
| |
| 作者单位： | 秦皇岛烟草机械有限责任公司,河北省秦皇岛市经济技术开发区龙海道67号,066318 |
| |
| 摘 要： | 目前在实施分切打叶时主要存在3个问题,即传统的铺叶切断设备无法满足分切打叶工艺精确控制烟叶分切比例的要求,以及如何提高叶基烟叶的打叶效率与非叶基烟叶的风分效率.为此,对目前国内使用的分切打叶工艺与设备进行了研究,确定在分切打叶中使用烟叶智能定位装置控制烟叶的分切比例,采用吹式打叶技术提高叶基烟叶的打叶效率,采用分流式风分技术提高非叶基烟叶的风分效率.试验结果表明,分切打叶工艺设备与传统全叶打叶机组相比,以中部烟为例,出片率提升0.42％,大中片率提升2％左右,碎片率降低0.4％,有助于烟叶的充分利用和纯化烟叶品质.
|
| 关 键 词： | 分切打叶 智能定位 吹式打叶 分流式风分 |
Improvement of Tipping and Threshing Equipments |
| |
| ZHANG ZHONG-FENG,ZHANG SHI-CHENG,QI HAI-TAO. Improvement of Tipping and Threshing Equipments[J]. Tobacco Science & Technology, 2011, 0(6) |
| |
| Authors: | ZHANG ZHONG-FENG ZHANG SHI-CHENG QI HAI-TAO |
| |
| Affiliation: | ZHANG ZHONG-FENG,ZHANG SHI-CHENG,and QI HAI-TAO Qinhuangdao Tobacco Machinery Co.,Ltd.,Qinhuangdao 066318,Hebei,China |
| |
| Abstract: | In order to improve the control of tipping proportion,the threshing efficiency and the pneumatic separation efficiency,the conventional tipping and threshing equipments were improved.An intelligent positioning device was used to control the tipping proportion,blowing threshing technology was adopted to improve the threshing efficiency,and separate separation technology was used to improve the separation efficiency of tip portion.The results of experiments showed that: in the case of middle leaf threshing,ti... |
| |
| Keywords: | Tipping and threshing Intelligent positioning Blowing threshing Separate pneumatic separation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
