| 亚干式内排屑深孔钻削系统试验与分析 |
| |
| 引用本文： | 彭海,袁方. 亚干式内排屑深孔钻削系统试验与分析[J]. 现代制造工程, 2010, 0(4) |
| |
| 作者姓名： | 彭海 袁方 |
| |
| 作者单位： | 西安石油大学机械工程学院,西安,710065 |
| |
| 基金项目： | 陕西省教育厅资助项目 |
| |
| 摘 要： | 结合亚干式切削和内排屑深孔钻削加工的特点,提出亚干式内排屑深孔加工系统的设计思路。结果表明,该系统具有良好的排屑及冷却效果。同时,通过与湿式(BTA)钻削加工的试验对比及分析,在合理的切削用量下,亚干式钻削的切削性能在排屑及冷却方面要优于湿式(BTA)钻削。
|
| 关 键 词： | 亚干式切削 深孔加工 湿式钻削 |
Experiments and analysis of the near-dry deep hole drilling system |
| |
| PENG Hai,YUAN Fang. Experiments and analysis of the near-dry deep hole drilling system[J]. Modern Manufacturing Engineering, 2010, 0(4) |
| |
| Authors: | PENG Hai YUAN Fang |
| |
| Affiliation: | PENG Hai,YUAN Fang (Xi'an Shiyou University,Xi'an 710065,China) |
| |
| Abstract: | Based on the characteristics of near-dry cutting and BTA deep-hole drilling,a deep-hole processing solution by means of near-dry cutting technology was presented.The results show that the system have better effects on discharge chips and refrigeration.At the same time near-dry cutting function was better than BTA cutting with appropriate cutting parameters through compare with BTA cutting machining. |
| |
| Keywords: | near-dry cutting deep-hole process BTA drilling |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
