Tensile properties of hollow glass bead‐filled polypropylene composites

The tensile properties of polypropylene (PP) filled with hollow glass beads have been measured at room temperature to identify the effects of the particle contents, size and its distribution on them in the present article. The mean diameters of the fillers were 11, 35, and 70 μm, and they were named as TK10, TK35, and TK70 respectively. The surface of these particles was pretreated with silane coupling agent. The results showed that the yield stress (σ_y) decreased gently for PP/TK70 systems, whereas decreased relatively obviously for PP/TK35 systems with increasing the volume fraction (?_f) of the fillers. When ?_f was less than 5%, the tensile strength at break (σ_b) of the composites increased with the increase of ?_f. When ?_f was more than 5%, σ_b was almost a constant for PP/TK70 systems, while σ_b decreased linearly for PP/TK35 systems. The tensile fracture strain (ε_b) of the composites decreased suddenly when ?_f was less than 5%, and then decreased slightly with increasing ?_f. When ?_f was 10%, σ_y and σ_b increased while ε_b decreased with the increase of the bead diameter. Furthermore, the σ_y was predicted by means an equation proposed in the previous work, and good interfacial adhesion was shown between the hollow glass beads and the matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1697–1701, 2007