| Abstract: | In traditional coordinated traffic signal control on an urban road network, the following two problems occur. First, the conventional method involves a time lag between traffic measurement and signal control. Second, an abrupt switching of control parameters throws the traffic flow into disorder. This paper proposes a new approach to avoid these problems. We increase the frequency of switching. The control parameters are switched as frequently as every two cycles. At the time of switching, minor variations of the ongoing plan are generated. For each variation of plan, traffic delay at each intersection is predicted based on measured traffic data at upstream detectors. Then the plan minimizing the delay is chosen to be the control parameters in the next cycle. In order to evaluate the validity of this approach, experiments were carried out using a traffic simulator. The experiments indicate that the proposed method reduces the queue length significantly, compared with the conventional method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(3): 49–57, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20391 |
