Friction and wear properties of NBR/PVC composites |
| |
Authors: | Xinwu Huang Nong Tian Tingmei Wang Kun Wang Qunji Xue |
| |
Affiliation: | 1. State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Science, Lanzhou 730000, China;2. Graduate School of the Chinese Academy of Sciences, Beijing, 100049, China |
| |
Abstract: | Acrylonitrial butadiene rubber (NBR)/Polyvinyl chloride (PVC) composites with different PVC content were prepared. The effect of PVC content on the mechanical strength and tribological properties of the NBR/PVC composites was investigated. The morphologies of the worn traces and debris of NBR/PVC composites and worn traces of mating ball were observed using a scanning electron microscope (SEM). It was found that the friction and wear of NBR/PVC was lower than that of NBR without PVC. The NBR/PVC composite with 30% PVC content showed the best synthetic mechanical and tribological properties. The inferior elastic properties and the lesser deformation under the applied load of composites with PVC resulted in hysteric force and adhesion force decrease, which leading to a lower friction and wear of NBR/PVC composites. The frictional failure unit of NBR70/PVC30 composite being smaller should be an important reason of the wear of the composite being lowest. The lubricating effect of PVC played an important role in decreasing the friction coefficient and wear of NBR/PVC composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007 |
| |
Keywords: | acrylonitrial butadiene polyvinyl chloride NBR/PVC composites friction wear SEM analysis |
|
|