Application of single and mixtures of red sandalwood and other natural dyes for dyeing of jute fabric: studies on colour parameters/colour fastness and compatibility

Single and binary mixtures of aqueous extracts of red sandalwood (RSW) with aqueous extract of other natural dyes like manjistha (MJ), jackfruit wood (JFW), marigold (MG), sappan wood (SW) and babool (BL) in different proportions are applied on bleached jute fabric for its dyeing after double pre-mordanted with myrobolan and aluminium sulphate applied in sequence under optimised conditions of mordanting with effects of use of different proportions of binary mixture of selective natural dyes on colour strength and other colour. Parameters and colour fastness properties have been investigated. Compatibility of selective binary mixture of dyes was also judged by a relatively newer colour index parameter established earlier from this laboratory. Binary of mixture of RSW and MJ is found to be most compatible with rating 4 (in 0–5 scale), and mixture of RSW:MG and RSW:JFW is found to have average compatibility having rating 3. Dyed fabric samples have also been further treated with cationic dye-fixing agents namely N-cetyl-N-trimethylammonium bromide (CTAB), cetrimide and Sandofix-HCF to improve wash fastness. Treatment with 2% CTAB or Sandofix-HCF improves the wash fastness to nearly 1 unit. Treatment with 1% benztriazole improves the light fastness of natural dyed jute textiles nearly half to one unit. The possible chemistry and mechanisms for such improvement in wash fastness by CTAB and improvement of light fastness by benztriazole for jute have also been discussed to explain the observed effects.