| 5754铝合金板材冲压成形材料模型研究与应用 |
| |
| 引用本文： | 傅垒,李利,黄鸣东,刘贞山,刘成. 5754铝合金板材冲压成形材料模型研究与应用[J]. 中国有色金属学报, 2020, 0(1): 18-25 |
| |
| 作者姓名： | 傅垒 李利 黄鸣东 刘贞山 刘成 |
| |
| 作者单位： | 中铝材料应用研究院有限公司 |
| |
| 基金项目： | 中铝明星计划基金项目(2017MXJH06);北京市科委基金资助项目(Z171100002317027)。 |
| |
| 摘 要： | 建立准确的材料模型是冲压数值模拟的基础,通过3个方向的单向拉伸试验、以及单向压缩试验和成形极限试验,获得5754铝合金材料性能数据,基于Voce硬化模型、Barlat89屈服准则和成形极限,建立5754铝合金成形用材料模型。利用Pamstamp-2G软件,对5754铝合金汽车大梁的冲压成形进行数值模拟,并与冲压试验结果进行对比。结果表明:数值模拟获得的应变数据与试验测量获得的应变数据比较接近,且各区域最大减薄率误差在±10%以内,验证数值模拟的可靠性。
|
| 关 键 词： | 5754铝合金 硬化模型 屈服准则 成形极限 数值模拟 |
Investigation and application on material model in sheet forming of 5754 aluminum alloy |
| |
| FU Lei,LI Li,HUANG Ming-dong,LIU Zhen-shan,LIU Cheng. Investigation and application on material model in sheet forming of 5754 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2020, 0(1): 18-25 |
| |
| Authors: | FU Lei LI Li HUANG Ming-dong LIU Zhen-shan LIU Cheng |
| |
| Affiliation: | (CHINALCO Materials and Application Research Institute,Beijing 102209,China) |
| |
| Abstract: | An accurate material model is the basis for numerical simulation of stamping.By means of tensile tests in three directions,uniaxial compression tests and forming limit tests,the material property data of 5754 aluminum alloy is obtained.Based on the Voce hardening model,Barlat89 yield criterion and forming limit curves,the material model of 5754 aluminum alloy for stamping was established.With the Pamstamp-2G software,the stamping operation of automobile girders of 5754 aluminum alloy was simulated,which was compared with the actual stamping operation.The results show that the plastic strain calculated by the simulation is close to the experimental measurement one,the maximum thinning rate error is within±10%,which verifies the reliability of numerical simulation. |
| |
| Keywords: | 5754 aluminum alloy hardening model yield criterion forming limit numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
